|
|
Details of hexagonal water system |
Product Name: Hexagonal water system ACTIMO Gold
|
Model: KS-0210
Body:
Size: width 260 x length 270 x height 370
Material: ABSxml:namespace prefix
Weight: 2.75 kgxml:namespace prefix = o /> |
|
|
Container:
Size: width 175 x length 123 x height 277 mm
Material: Anti-biotic ABS PC
Weight: 640 grams
Volume: 2 liters
Maximum rotation: 9 minutes |
|
Worthiness of the hexagonal water system ACTIMO Gold |
This system can produce hexagonal water 4,000 liters per year or per life time of one Super Cube box (300 hours). Electricity cost is 18.90 baht per year or per life time of one Super Cube box (300 hours).
- Expense is 1.63 baht per liter with respect to the life time of the electric device of 10 years.
- Expense is 7.50 baht per liter for the first year
and 0.98 baht per liter per year after that.
The expenses above do not include the cost of water and filtration depending on the chosen system. The cost of tap water in a normal household is approximately 0.0085-0.009 baht per liter.
|
Examples of international standards and certifications that the hexagonal water system ACTIMO Gold has received |
1. Clean the water container with sponge and dish soap and cleanse it well with water.
2. Inspect the mineral material. Inside the box, there is a mineral material with a silicon ring rotor. Check to see if the silicon ring is placed at the middle of the base, and make sure that the rotor is also right in the middle.
3. Install the mineral material in the container.
· Clean the mineral material well before placing it in the container.
· Place the mineral material in the middle of the container and turn it slower in clockwise direction until it is secured.
· Inspect the device assembly by shaking the container to see if the mineral material is securely attached.
· Clean the mineral material by spinning the water and draining it twice. In case of first use or having not used the device for a long time, do the following:
- Fill the container with clean water and turn on the device.
- Once the device finishes, drain the water and restart the cleansing process once more.
· Fully fill up the container with water and place the container at the right position (make sure that the mineral material and the rotor is securely installed).
· Plug in the device.
· Push the “ON” button. The display will appear 0000.
· Adjust the timer by pushing the “MODE” button. The display will show the amount of time you want
Pushing the button once means 7 minutes.
Pushing the button twice means 9 minutes.
· Push the START/STOP button to start or stop the device.
· After the device has finished, it will stop the process with one beep sound indicating the end. You may also stop the operation before the time is up. If you want to remove or lift up the water container, make sure you press the ON/OFF button to turn off the device.
· Turn off the device by pushing the ON/OFF button and unplug.
You may set the timer as you wish:
· 7 minutes: in case that you already use mineral water and only want to create hexagonal molecules.
· 9 minutes: in case of regular drinking water and you wish to make mineral water and hexagonal molecules.
· After use, unplug the electrical cord and wipe off water drops and dust with dry cloth.
· Make sure there is no wet spot under the base of the device and always put the device in the upright position.
· The materials used in the mineral container are natural ones and is cleaned by ultrasonic. If low quality or dirty water, such as water from a low-quality filter, is used, the color and the surface of the mineral container may alter. It should be cleaned by using a brush and washing it clean water.
· After the cleaning, re-assemble the device and clean once more by spinning with clean water.
· The mineral container should be replaced after 300 hours of use.
· Replace the water container if it breaks and cracks. Contact the company or retailer.
Press the ON/OFF button to turn on the device. Then, press the MODE button for 5 seconds. The display will show the total hours of usage.
1. Do not place the device near the following areas:
- near a computer.
- near a telephone or a sound-making device.
- near a vibrating area.
- near a magnetic field.
2. Only regular water should be used in the water container. Do not use fruit juice, milk, or other beverages, because the mineral material will get dirty.
3. Do not dissemble the device into small parts.
4. Do not press two buttons at the same time.
5. Do not bang or drop the device.
6. Do not use it continuously for more than one hour.
7. Unplug when not in use.
8. Do not let the plate area wet.
9. Do not use the device without water inside.
10. Do not use the water at a temperature higher than 80 degrees Celsius, because the device might get damaged.
11. Do not open the lid or put your hand in while the device is operating.
12. Always keep the mineral material in a dry area.
13. Do not put other kinds of substances in the water container while the device is operating.
14. Do not add any chemical substance or boil the water.
Make sure to follow the instruction every time there is an electrical problem.
1. If the device does not work, unplug for 3 minutes and plug it in again and carefully follow the instruction.
2. When plugging in or unplugging, hold at the plug itself, not at the electrical cord.
3. Using the device in an area with high amount of dust or moisture may reduce the life time of the device. Use it in a dry and dust-free area.
4. Avoid using the device in a high temperature area, which may reduce the life time of the device.
5. Place the device on a smooth and level surface, not on a slope.
6. If the rubber at the base of the device falls off, firmly re-install it.
7. Avoid using the device near another sound-generating device, which may reduce the life time of the hexagonal water system.
8. Replace parts according to their respective life times.
9. Do not use the rotor improperly. Regularly observe if the color of the rotor has changed, which may be caused by stains of metals.
10. Do not drop the rotor on the floor because the rotor might get dirty.
11. Clean the rotor when it gets dirty.
12. Clean the rotor at least once a month.
13. Keep the device away from children.
|
Problems and trouble-shooting |
|
Conditions of the device |
Inspections to be made |
|
1. The device does not work. |
* Is it being unplugged? |
|
2. Timer cannot be set. |
* Has the button been pressed? |
|
3. Water in the container does not spin. |
* Is the rotor of the mineral material at the correct position?
* Is the mineral material properly installed with the water container? |
|
4. The device generates loud noise. |
* Is there a foreign object in the water container or near the mineral material? |
|
5. Water tastes bad. |
* Is this the first time the device is used?
* Is it dirty water? |
|
6. Water’s color changes. |
* Has the mineral material been cleaned?
* Did you spin and drain water twice before actually using it?
* Is the water clean? |
|
7. There are contaminations. |
* For the first use, some foreign objects might have come with the mineral material, but those objects should pose no danger. |
|
8. The motor spins all the time. |
* If you remove the water container while the machine is still working, the mother will still spin according to the timer. Make sure to turn off the device first. |
This product has been inspected and produced under a strict quality control with warrantee:
1. If there is a defection caused by the manufacturer, the company shall repair the product at no cost for the duration of one year.
2. If there are costs of defections due to misusage of the user not following instructions as indicated in the warrantee documents, although it may be in the warrantee period, the company shall charge for the actual costs.
3. There will be no issuance of a new warrantee.
| 
Welcome you to the miracle of water 